HP qms 4060 Manuale Utente
Communications
4-49
Printer Configuration
Setting Parallel Interface Parameters
Use the Administration/Communications/Parallel menu to set the par-
allel interface values used for printer-host communications.
allel interface values used for printer-host communications.
Mode
The parallel interface supports Centronics parallel communication as
well as IEEE 1284 bidirectional parallel communication.
well as IEEE 1284 bidirectional parallel communication.
Default
00003 (3 sec.)
Notes
A value of 00000 is the same as infinity (no timeout).
Menu
Administration/Communications/Parallel/Mode
Choices
Interactive—Establish two-way communication
between the host and the printer.
between the host and the printer.
Noninteractive—Establish one-way communication
from the host to the printer.
from the host to the printer.
Disabled—Turn off parallel communication with the
host. The printer stops accepting print jobs over the
parallel interface.
host. The printer stops accepting print jobs over the
parallel interface.
Default
Noninteractive
Notes
The printer must be restarted for changes to the
menu to take effect. You can either let the printer
restart automatically after you save the change and
exit from the Configuration menu, or you can wait for
the change to take effect the next time you manually
turn on the printer. See chapter 5, “Additional
Technical Information,” for a discussion of the
different modes.
menu to take effect. You can either let the printer
restart automatically after you save the change and
exit from the Configuration menu, or you can wait for
the change to take effect the next time you manually
turn on the printer. See chapter 5, “Additional
Technical Information,” for a discussion of the
different modes.