HP qms 4060 Manuale Utente
Communications
QMS 4060 Print System Reference
4-54
Setting Network 2 Options
CrownNet
For information on options and defaults found in this menu, see chap-
ter 2, “Printer Configuration,” in the
ter 2, “Printer Configuration,” in the
QMS CrownNet System Adminis-
trator’s Guide.
PS Protocol
Sets the binary communications protocol (BCP) for communicating
over a CrownNet interface to a PostScript printer.
over a CrownNet interface to a PostScript printer.
Menu
Administration/Communications/Network 2/PS
Protocol
Protocol
Choices
Normal—Enables standard, ASCII (7-bit) hex protocol.
Data is sent and received in ASCII format. This mode
is recommended if you do not print binary data. It was
designed for data in the printable ASCII range. Print
jobs can change this setting through PostScript
operators.
Data is sent and received in ASCII format. This mode
is recommended if you do not print binary data. It was
designed for data in the printable ASCII range. Print
jobs can change this setting through PostScript
operators.
Normal Fixed—Enables standard, ASCII (7-bit) hex
protocol. Print jobs cannot change this setting through
PostScript operators.
protocol. Print jobs cannot change this setting through
PostScript operators.
Binary—Enables quoted binary communications
protocol (BCP). Print jobs can change this setting
through PostScript operators. Data in the printable
ASCII range also prints.
protocol (BCP). Print jobs can change this setting
through PostScript operators. Data in the printable
ASCII range also prints.