HP qms 1660e Manuale Utente
Replacing the
Printer and
Controller
Board Covers
6-23
Printer Options
6
Remove the control board cover.
a
Remove and set aside the 15 screws on the metal controller
board cover.
board cover.
b
Remove the metal cover and set it aside.
Replacing the Printer and
Controller Board Covers
The printer and controller board covers must be reinstalled after a
SIMM or an optional network interface is installed.
SIMM or an optional network interface is installed.
▲
Caution:
It's very important to protect the printer controller board from
electrostatic damage while performing this task. Review the anti-
static guidelines in the “Removing the Printer and Controller Board
Covers” section, earlier in this chapter.
static guidelines in the “Removing the Printer and Controller Board
Covers” section, earlier in this chapter.