HP qms 1660e Manuale Utente

Pagina di 314
Optional
Interfaces
QMS 1660E Print System Reference
6-38
CrownNet (Ethernet/Token-Ring) network interface or a LocalTalk 
interface. These additional interfaces allow you greater flexibility when 
working in a multiple environments.
An optional interface is installed in the OPT I/O opening on the back 
of the printer. This opening is covered with a rectangular metal plate.
The printer’s simultaneous interface operation (SIO) allows the 
optional interface to be active at the same time as the other ports. In 
other words, your printer can communicate through up to four ports 
with four host computers or computer networks. One host can inter-
face through the parallel port, one through the serial port, one through 
the Ethernet port, and one through the optional interface port. See 
your QMS vendor for a list of optional network interfaces available.
CrownNet Network Interface
The QMS CrownNet network interface card (NIC) is an internal, 
RISC-based combination of a network interface card and host 
software that allows your printer to be connected to either an Ethernet 
or a Token-Ring network. The CrownNet NIC supports the following:
»
Note: 
The functionality of the CrownNet Ethernet NIC is identical to 
the Ethernet interface resident on your printer.
Operating System/Protocol
Ethernet 
Networks
Token-Ring 
Networks
AppleTalk (EtherTalk)
ü
LAN Manager/LAN Server (NetBIOS/
NetBEUI)
ü
ü
NetWare (IPX/SPX)
ü
ü
TCP/IP
ü
ü
OPT I/O
SERIAL
PARALLEL
ETHERNET