HP qms 1660e Manuale Utente

Printer Engine

Features

4-55

Printer Configuration

Printer Engine Features

Through the Administration/Engine menu you can set print engine-
related parameters.

Adjusting the Image Alignment

Usually, you don’t need to change the way images are placed on the 
printed page. But if you do, the Image Alignment option allows you to 
adjust both the horizontal and the vertical placement. 

To check image alignment, print a standard status page (use the Sta-
tus Page key on the printer control panel) on letter/A4-size paper. 
When the printer is placing images properly, the alignment angle bar 
in the lower-left corner of the status page is 0.5"/12.7 mm from the left 
and bottom edges of the page. If the angle bar is off, use the Image 
Alignment option to align the image horizontally and vertically in pixel 
increments (

1

/

300

" or 0.08 mm). 

Engine constraints may limit the accuracy of pixel alignment.

Horizontal Offset

Vertical Offset

Administration/Engine/Image Alignment/Horiz Offset

000-300 (0.00"/0 mm-1.00"/25.4 mm)

100 (0.33"/.84 mm)

See the following sections, “Horizontal and Vertical Controls,” 
and “Image Alignment Guidelines.”

Administration/Engine/Image Alignment/Vertical Offset

000-300 (0.00"-1.00")

100 (0.33"/.84 mm)

See the following sections, “Horizontal and Vertical Controls,” 
and “Image Alignment Guidelines.”