HP qms 1660e Manuale Utente

Pagina di 314
Printer Start-Up
Options
4-59
Printer Configuration
monitors, and printers and the reduction of air pollution caused by 
power generation.
»
Note: 
The addition of some optional interfaces, in some 
combinations, may cause the product to become non-compliant.
The Energy Saver option specifies whether the printer changes to a 
low-power state (the engine remains on, but the fuser turns off) after a 
specified period of inactivity. When a print job is received, the printer 
begins processing it in the background and returns to normal power 
within 90 seconds.
Printer Start-Up Options
The Administration/Startup Options menu allows you to configure 
your printer to run certain options automatically when you turn it on.
Enabling/Disabling the Start-Up Page
By default, the printer prints a start-up page when you turn it on. The 
start-up page lists basic information about the printer, such as its 
name, the PostScript emulation level and version, and various printer 
settings. However, you can turn the start-up page off to conserve 
paper and toner.
Menu
Administration/Engine/Energy Saver
Choices
15 Min—Use lower power after 15 minutes of inactivity.
30 Min—Use lower power after 30 minutes of inactivity.
1 Hour—Use lower power after 1 hour of inactivity.
2 Hours—Use lower power after 2 hours of inactivity.
3 Hours—Use lower power after 3 hours of inactivity.
Off—Use normal power all of the time.
Default
1 Hour
Menu
Administration/Startup Options/Do Start Page