HP qms 1660e Manuale Utente
Timeouts
4-65
Printer Configuration
Setting an ESP Timeout
The ESP (Emulation Sensing Processor) timeout is the maximum
number of seconds the printer uses to match an emulation before
printing the job in the ESP default emulation (Administration/Emula-
tions/ESP Default Emul menu).
number of seconds the printer uses to match an emulation before
printing the job in the ESP default emulation (Administration/Emula-
tions/ESP Default Emul menu).
Setting a Manual Feed Timeout
The manual feed timeout is the maximum number of seconds the
printer waits for the next sheet of media to be placed in the manual
feed tray. If the timeout occurs, the manual feed job is canceled. The
multipurpose tray, when accessed by a PostScript emulation operator
as bin 0, is the manual feed tray.
printer waits for the next sheet of media to be placed in the manual
feed tray. If the timeout occurs, the manual feed job is canceled. The
multipurpose tray, when accessed by a PostScript emulation operator
as bin 0, is the manual feed tray.
Notes
A value of 000 is the same as infinity (no timeout).
When selecting a baud rate of 2400 or below (Administration/
Communications/Serial/Baud Rate menu), increase the
emulation timeout value as follows:
Communications/Serial/Baud Rate menu), increase the
emulation timeout value as follows:
Baud Rate
Emulation Timeout (seconds)
2400
10*
1200
20
600
40
300
80
*A baud rate of 2400 works with a 5-second emulation timeout
value, but there is no margin for delays between characters.
value, but there is no margin for delays between characters.
Menu
Administration/Communications/Timeouts/ESP Timeout
Choices
00000-99999
Default
00003 (3 sec.)
Notes
A value of 000 is the same as infinity (no timeout).
Menu
Administration/Engine/Man Feed Timeout
Choices
000-300 (0-5 min.)
Default
060 (1 min.)
Notes
A value of 000 is the same as infinity (no timeout).