HP qms 1660 Manuale Utente

Pagina di 306
Memory
QMS 1660 Print System Reference
5-12
The number and type of features you can run on your printer simulta-
neously depend on the amount of RAM you have and how that RAM 
is distributed. Your printer comes with either 12 MB or 24 MB of RAM, 
but it is upgradable to 64 MB by adding Single In-line Memory Mod-
ules (SIMMs). 
RAM Disk
Also called a virtual disk, the RAM disk is an area of RAM that is used 
to simulate an additional hard disk. Data can be written and read 
more quickly than on a hard disk, but a RAM disk loses any 
information stored on it when the printer's power is turned off. The 
spooling buffer is a RAM disk client if a hard disk is not available.
SCSI (Small Computer System Interface)
The printer’s SCSI port (located on an optional IDE-SCSI board) 
allows you to connect up to three optional SCSI hard disks, providing 
storage for fonts, emulations, and other files. Hard disks are also 
used to increase the amount of collation that can be accepted and 
provide a secondary storage area for spooled data, while providing 
virtual memory capabilities.
IDE (Integrated Drive Electronics)
The optional IDE-SCSI board also allows you to connect an internal 
IDE hard disk. “Integrated” refers to the fact that all of the controller 
electronics are on the drive itself, so no separate adapter card or 
expansion slot is required.
Volatile Memory
This type of memory is cleared when the printer is turned off. For 
example, most RAM is volatile.
Non-volatile Memory
This type of memory is not lost when the printer loses power.