HP qms 1660 Manuale Utente
Media Input
Options
6-9
Printer Options
Removing the Paper Feeder
If you installed the paper feeder before the cassette supporter, you
must first remove the paper feeder to install the cassette supporter.
must first remove the paper feeder to install the cassette supporter.
Remove the paper feeder from the printer as follows (referring to the
illustrations in the previous section if necessary):
illustrations in the previous section if necessary):
1
Turn off the printer, and disconnect the power cord and all
interface cables.
interface cables.
2
Remove the paper cassettes from the printer.
3
Remove the paper feeder from the printer.
Follow, in reverse order, the steps in the “Installing the Paper
Feeder” section of this chapter. The following is a quick overview
of the procedure:
Feeder” section of this chapter. The following is a quick overview
of the procedure:
a
Remove the connector cover.
b
Unplug the paper feeder's connector cable.
c
Unlock the green lock levers on the paper feeder (pull them
toward you).
toward you).
d
Lift the printer off the paper feeder.
e
If you are installing a cassette supporter, refer to “Installing
the Cassette Supporter,” later in this chapter.
the Cassette Supporter,” later in this chapter.
Otherwise, continue with step f.
f
Replace the connector cover.
g
Reconnect the power cord and interface cables. Then turn on
the printer and reinstall the paper cassette.
the printer and reinstall the paper cassette.