HP qms 1660 Manuale Utente
Optional
Network
Interfaces
6-39
Printer Options
Optional Network Interface Assembly Kit
The optional network interface assembly kit includes the following:
n
An interface card
n
A plastic standoff
n
Interface documentation (for CrownNet network interface cards)
n
Interface software (for CrownNet network interface cards)
The kit may also include additional parts not required for network
interface installation on this printer.
interface installation on this printer.
Installing an Optional Network Interface
M
WARNING!
Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG!
Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲
Caution:
It's very important to protect the printer controller board from
electrostatic damage while performing this task.
If an anti-static wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to any convenient
electrical ground (for example, the bare metal chassis of equipment,
as on the back of a computer, that is plugged in but turned off).
Never attach the wrist strap to any piece of equipment with an electri-
cal current present. Turn off all power switches first. Plastic, rubber,
wood, painted metal surfaces, and telephones are not acceptable
grounding points. The printer isn't an acceptable grounding point
either because it must be unplugged before you perform this task.
attach one end of it to your wrist and the other end to any convenient
electrical ground (for example, the bare metal chassis of equipment,
as on the back of a computer, that is plugged in but turned off).
Never attach the wrist strap to any piece of equipment with an electri-
cal current present. Turn off all power switches first. Plastic, rubber,
wood, painted metal surfaces, and telephones are not acceptable
grounding points. The printer isn't an acceptable grounding point
either because it must be unplugged before you perform this task.
If you don't have an anti-static wrist strap, discharge your body's
static electric charge by touching a grounded surface before you han-
dle any printer boards or components and before removing the con-
troller board cover. Redischarge your body’s static electric charge
static electric charge by touching a grounded surface before you han-
dle any printer boards or components and before removing the con-
troller board cover. Redischarge your body’s static electric charge