HP qms 1660 Manuale Utente

Updating

System

Software

QMS 1660 Print System Reference

6-74

10 Send the new image to the printer.

Type

copy /b system.dl com

↵

where

is 1 to 4. (/b refers to binary files.) If you’re not sure of the

number of the serial port, check your PC’s documentation.

The downloading process takes about 5 minutes, depending on
the size of the file and the speed of your PC. The Ready indicator
blinks as the new system image is copied to flash ROM. After the
updated system software has been written to flash ROM, the
printer reboots with the new system image, prints a start-up page,
and returns to

IDLE

Note:

The new flash image does not erase the old image until the

printer verifies that the new image is valid.

11 Print another advanced status page, and verify that the cur-

rent configuration settings match the previous configuration
settings (on the advanced status page printed in step 5).

12 If there are differences in the configuration settings, correct

them through the printer configuration menu.

Downloading System Software to a Non-

Functional Printer

If the print system software is functional (the printer starts up nor-
mally, and

IDLE

displays in the message window), go to one of the

previous sections, “Downloading System Software to a Functional
Printer—SYSTEMDL.PS” or “Downloading System Software to a
Functional Printer—SYSTEM.DL.”

If the print system software is non-functional (the printer can’t start
up), use these instructions to download the system software.

Note:

Before you can use these instructions, you must have

decompressed the system software, as described in the previous
section.