HP server tc2120 Manuale Utente

 

Tip #2. Configure the Parallel (LPT) Port for ECP Mode 

The device manager may not show this port on the list when not configured in ECP 
mode. 

HP recommends that you systematically configure the LPT port for ECP mode. Use 
the following procedure to change the setting: 

1.  Press F10 during power on self-test. 

2.  Select Advanced | I/O Device Configuration | Parallel Port Mode. 

3.  Press Enter and select "ECP.” 

4.  Press Esc Esc Enter and select yes to confirm to save and exit. 

Windows 2000 checks for digital signatures on driver files to help maintain system 
integrity.  During the installation or update of a driver, if there is no matching 
signature file Windows 2000 displays a "Digital Signature not Found" 
box. 

• 

To expedite release of new products, HP may ship drivers without signature files.  
All Windows 2000 drivers provided by Hewlett-Packard are submitted to 
Microsoft for certification testing.  Upon completion of testing, Microsoft 
produces signature files.  HP then posts the revised driver package at 

http://www.hp.com.  

•  If a signature warning is displayed during installation of a driver, you may 

override the warning.  We recommend that you check the HP Website for the 
latest driver package. If available, install the new driver.   

•  You can elect to have Windows 2000 ignore signatures: Open Start | Settings | 

Control Panel | System | Hardware | Driver Signing.  This is helpful if you are 
setting up multiple systems. 

•  Digital signatures are a powerful way to ensure system integrity as you add 

drivers to your systems - whether provided by HP or others.