HP server tc2120 Manuale Utente

 

3.  From the drive A: prompt, format and transfer DOS system files to the hard disk 

DOS boot partition by entering one of the following commands: 

—  When using the NetWare DOS utility, enter: 

A:\>FORMAT C: /X /S 

—  When using the MSDOS utility, enter: 

A:\>FORMAT C: /S 

4.  Create the appropriate directories and copy the necessary drivers and files to the 

DOS boot partition by issuing the following commands at the DOS prompt: 

C: 

MD \NWUPDATE 

CD \NWUPDATE 

5.  Insert the HP disk NW patch (created with the Startup-CD) and enter: 

COPY A:\*.* 

6.  Remove the diskette and insert the NW 5.1 CDROM in the drive, then reboot the 

server. 

7.  After bootup, when Netware brings you to the initial setup screen, press Alt + 

F10 to exit to the command line. 

8.  At the command line, enter the following lines:

 

DOWN 

Z: 

INSTALL –lic –bootcd 

9.  Select the Appropriate Language, if prompted. 

10.  Press F10 to Accept the License Agreement. 

11.  Press Enter to setup a new server, then scroll down to be sure that Continue is 

highlighted. 

12.  Press Enter to continue. 

13.  Modify or accept the server settings, the regional settings, and the mouse and 

video configuration.