Canon bjc-70 Manuale Utente

If you are having printing problems, check the problems and solutions in
the following table.

Data from computer is

There may be a communica-

Check the computer or the 

printed, but is not what

tion problem between the 

application to see if the host 

you expected

printer and your computer.

is configured correctly:
printer port, printer driver,
print manager.

Cable connections may 

Check that your cable 

not be secure.

connections are secure.

Interface cable may be

Make sure your parallel

too long.

cable is less than 6.6 feet
(2 m).

Emulation switching may

Turn off Automatic

not be functioning properly.

emulation switching mode;
see Chapter 9, Customizing
the Printer, for details.

The printer driver may not

Make sure you selected the

be correct.

correct printer driver in your
software.

Printer control mode may 

Check that the printer 

not match the printer device.

control mode (BJ or Epson
LQ) matches the printer
driver you selected.

Previous software settings 

Check that the printer was 

may not be cleared.

cleared of the previous
software settings before the
print job started.

Printed characters do not 

Many graphics characters 

Set the correct Control mode 

match characters on the

and special symbols are 

using the operator panel. 

screen

produced by different ASCII 
codes according to the type 

Set the correct character 

of printer and computer 

table using the printer’s

being used.

FUNCTION settings. For
details on character tables
and character sets, contact
the Canon fax retrieval
system and request the 
BJC-70 Printer Command
Summary.