Canon bjc-70 Manuale Utente
24
Setting Up the Printer
Chapter 2
Printing a Test Pattern
To check that you have properly set up the printer, you can print one of the
printer’s test patterns. The test patterns are described in detail in Chapter 3,
Using the Printer. For now, print the Demo pattern.
printer’s test patterns. The test patterns are described in detail in Chapter 3,
Using the Printer. For now, print the Demo pattern.
1.
Make sure that the sheet feeder contains a stack of paper.
2.
Make sure that the printer is turned on.
3.
Press and hold down the
MENU
button until the printer beeps twice.
❏
The word FONT disappears and the number shown on the display
starts blinking.
starts blinking.
4.
Press the
button five times until the number 6 appears on the
display.
5.
Press the
MENU
button to start the Demo pattern.
After printing the demo pattern, the printer stays on-line.
N
If lines are missing in the printed text or if there is no ink on the paper,
check that the BJ cartridge is installed correctly (as described previously in
this chapter). You may also need to clean the print head; see Cleaning the
Print Head on page 101 for instructions.
check that the BJ cartridge is installed correctly (as described previously in
this chapter). You may also need to clean the print head; see Cleaning the
Print Head on page 101 for instructions.