Canon CDI-E075-010 Manuale Utente

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

• Some settings are not available with certain Shooting modes. Please refer to

Functions Available in Each Shooting Mode (p. 208).

• The AF frame will move back to its original position (Center) if you hold down the

 button.

• The AF frame can also be moved in the macro mode.
• The AF frame can be set in both the macro mode and the standard mode.
• The AF frame cannot be moved while focusing manually (p.106).
• When the Spot AE Point is selected as the light metering mode, you can use the

selected AF frame as the Spot AE Point (p. 83).

• For an explanation of the AF frame colors, please refer to page 39.

The AF frame indicates the area of the composition on which the camera focuses
and can be set manually to the desired area. This is convenient for focusing
accurately on an off-center subject to obtain the composition you desire.
However, the AF frame is fixed to center-point when an image is shot using the
viewfinder with the LCD monitor off or when using the digital zoom, even if you
previously set the AF frame to the position you desire.

Press the 

 button to turn on the LCD monitor.

Press the 

 button.

The AF frame appears in green on the LCD
monitor.

Move the AF frame to the desired area
using the 

C,D,B or A arrows on the

omni selector.

Press the 

  button.

You can immediately shoot the image using the selected AF frame by pressing
the shutter button instead of pressing the 

 button.

Shoot the image.