Canon ir5570, ir6570 Manuale

Use it to change the transfer/separation output setting when the 

manual feed tray is used as the source of paper by way of 

providing a remedial measure.

Setting

0: normal (default); 1: double transfer; 2: separation fault; 3: 

transfer fault

1

Use it to change the transfer/separation output setting when the 

side paper deck is used as the source of paper by way of providing 

a remedial measure.

Setting

0: normal (default); 1: double transfer; 2: separation fault; 3; 

transfer default

1

Use it to indicate the presence/absence of a reader unit.

0: reader unit absent (printer model)

1: reader unit present (default)

When the presence of a reader unit is detected, the machine will 

automatically set it to '1'.

1

Use it to adjust the dust detection level for the ADF (sheet-to-

sheet correction).

A higher setting will cause the machine to be more sensitive to 

finer particles of dust.

setting: 0 to 225

(Setting the item to '0' will disable the dust detection mechanism.)

1

Use it to add the dust detection level for the ADF (post-job 

detection).

A higher setting will cause the machine to detect finer particles of 

dust.

setting: 0 to 255

(Setting the item to '0' will disable the dust detection mechanism.)

1

Use it to set the interval at which a log is collected for the machine 

inside temperature/humidity and fixing temperature.

COPIER>FUNCTION>MIS-P>ENV-PRT and

COPIER>DISPLAY>ENVRNT

setting

0 to 480 (default: 60; in min)

1

Use it to switch from MEAP-full model to base model.

setting

0: off (based model)

1: on (full model)

1