Canon FAX-B155 Manuale Utente

Sequential Broadcasting sends one document to more than one location.

You can send to a total of 31 locations as follows:

One-touch Speed Dialling

=

10 locations

Coded Speed Dialling

=

20 locations

Regular dialling (Numeric buttons dialling)

=

  1 location

You can enter the One-touch Speed Dialling and Coded Speed Dialling locations in
any order. You simply press the One-touch Speed Dialling button, or press [Coded
Dial] followed by the two-digit code (with the numeric buttons).

You can also include one location using Regular dialling. Remember that when
using regular dialling, you must press [Start/Copy] after entering the number.

You can send up to 21 A4-size pages (based on the Canon FAX Standard Chart
No.1-standard resolution).

See Loading the document, p. 49.
You can set the resolution and density. See p. 51.

❚ You can send to up to 31 locations.
❚ Simply enter the numbers one after the other: press

the desired One-touch Speed Dialling button or
press [Coded Dial] followed by the two-digit code
(with the numeric buttons).

❚ You can enter only one number directly with the

numeric buttons using regular dialling. Remember
to press [Start/Copy] after entering the number.

❚ You can also press [Redial/Pause] to redial the last

number dialled with the numeric buttons.

❚ You must press each button within 10 seconds of

the preceding one. The fax begins the operation
approximately 10 seconds after you press the last
button.

❚ The fax reads the document into memory and

begins sending. Between transmissions, MULTI
TRANS. ON displays on the LCD.

❚ To cancel a transmission, press [Stop] during

dialling or transmission. All transmissions in the
sequence are cancelled.

STANDARD

9

0

TEL=

34567890

Start/Copy

TX/RX NO.

XXXX

MEMORY INPUT P01