Canon ir5570, ir6570 Manuale

– 3 –

The instructions that follow refer to installation to a
DADF-D1. Be sure to keep the following points in
mind for the work:

1. The host machine and the DADF must have

been properly installed before starting the work.

2. The power plug of the host machine must

remain disconnected.

1) Open the DADF.
2) Remove the face sticker [1] and the face plate

[2] from the right side of the DADF. (if for a
DAFD-D1)

You will no longer be using the removed
face sticker or face plate.

3) Fit the support plate [1] from the inside right of

the original delivery assembly cover of the
DADF, and secure it in place to the DADF using
2 screws [2] (binding; M4x6).

4) Secure the handle [1] using a stepped screw [2]

so that the guide plate [3] shown in Figure 2-2 is
inside the handle.

5) Secure the hinge guide plate [1] to the left hinge

of the DADF using a screw [2]. (if for a DADF-
H1)

6) Working from the front of the host machine and

using the handle [1], close the DADF as if to
pull it down, thereby making sure that the
handle has properly been installed.

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[1]

[2]

[1]