Canon K10344 Manuale Utente

Pagina di 64
1
2
C
A
B
Hardware Setup
Align the Print Head
Align the Print Head for better print results.
Extend the Output Tray Extension (C).
Load a sheet of supplied specialty paper (
Matte 
Photo Paper MP-101) in the Rear Tray (A) by 
referring to steps   to   in "Loading Paper" 
on page 49.
Be sure to use 
MP-101 for Automatic Print Head 
Alignment.
MP-101 cannot be fed from the Cassette. Load it in 
the Rear Tray.
MP-101 has front and back sides. Load it so that the 
cut corner (B) is at the top right.
Confirm the message on the LCD and press the 
OK 
button.
Print Head Alignment takes about 5 minutes to 
complete.
For details on media sizes and types you can use, refer to 
"Loading Paper" in the on-screen manual: 
Basic Guide.
This takes about 5 minutes.
Use a sheet of supplied specialty paper (
Matte 
Photo Paper MP-101) for alignment.
Wait until the pattern is printed, then go to the next 
step.