Canon MP530 Manuale Utente

 

29

 
d)  Ink Tank Error. 

If your printer is stating that an ink tank error has occurred please check the 
following if the message does not identify the problem cartridge ; 
 

i)  Check the ink feed tubing is neither too tight nor too loose as per page 13. 

. 

ii)  Unclick and re-click all cartridges whilst in the cartridge change position.  This 

will temporarily activate all the LED lights on the cartridges.  Any cartridge 
LED which does not activate (either flash or remain constant) is either 
physically damaged or attached incorrectly.   
 
If the above does not assist you please make your way through the following 
trouble shooting chart. 

 

 
i)  Open the printer cover and remove the plug holding down the printer lid 

sensor button. This will allow the cartridges to move to the cartridge change 
position.  
 

ii)  Unclick only the 8bk cartridge so that the chip is no longer contacting the chip 

reader however is still seated in the cartridge bay.  
 

iii) Re insert the printer lid sensor plug and close the printer lid.  An error 

message will pop up on the screen.  Follow the chart to diagnose the error.