Canon MP500 Manuale Utente

 

13

 

a)  Remove the backing to the double sided tape and attach the metal tube 

support arm approximately 6cm from the front as pictured below. 

   

  

 

 

 

 

 

 

  

   

                  

 

b)  Adjustments to the tube length may be required. To check this, move the 

cartridge holder left and right to each end of the printer. It should reach both 
ends with ease. Check that the tubing is neither too long nor too short. The 
tubing must not interfere with the printer data wire nor should it fall down into 
the paper support or cause any interference to the head movement.  

 

 

 

 

 

  

c)  If required, adjust the tube length by gently pulling the silicone tubing in the 

direction required.  

 

 

6cm