Nikon coolpix l14 Manuale Utente

Insert the Batteries

First S

te

p

s

B

Turn the camera off and make sure that the power-on lamp and the monitor have gone out before 
opening the battery-chamber cover.

B

• Read and follow the warnings and cautions (A iii, 97).
• Do not combine old and new batteries or batteries of different makes or types.
• Batteries with the following defects cannot be used:

B

To improve battery performance, select the type of battery currently inserted in the camera in the 
setup menu. The default setting is [Lithium]. When any other type of battery is used, turn the camera 
on and change the setting (

A 91).

C

Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a 
reliable brand.

C

To power the camera continuously for extended periods, use an EH-65A AC adapter (available 
separately) (

A 94). Do not, under any circumstances, use another make or model of AC 

adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

D

The camera adjusts monitor brightness according to the brightness of the surroundings to save 
power. 

When no operations are performed for five seconds, the monitor dims. 

If no operations are performed for fifteen seconds, the monitor turns off and the power-on lamp 
blinks. If no operations are performed for another fifteen seconds, the camera enters standby mode. 
To reactivate the camera in this step, press the shutter-release button halfway. 

If no operations are performed in standby mode for another three minutes, the camera turns off. The 
amount of time allowed to pass before the camera enters standby mode can be specified from the 
auto off menu (

Batteries with peeling

Batteries with insulation that 
does not cover the area 
around the negative terminal.

Batteries with a flat 
negative terminal