Nikon DS-2MBWC Manuale Utente

.

NETWORK

.

   

VI Basic Operations 

 

4    Using the DS-L1 via a Network 

- 94 - 

Once a PC and the DS-L1 are connected through a network, it is possible to check or capture the 
image that is being shot by the camera head of the DS-L1 from a WEB browser. Even from a 
distance, you can check what image the DS-L1 is currently shooting. When you access the DS-L1 
from a WEB browser, a WEB screen is displayed on which you can operate the DS-L1. There are 
two WEB screens, ROOM1 and ROOM2, available depending on your needs. 

 

•  ROOM1 

Displays the image currently being shot at a specified interval. Also allows you to control 
the DS-L1 or display a stream image. 

•  ROOM2 

Allows you to load saved image files from a CF card into the PC. 

 

If multiple PCs simultaneously access one DS-L1 through a WEB browser, operation may slow 
down. In the case of the simultaneous access from only two units of PC, the operation should be 
comfortable. 

NOTE:  The screen shots shown in this section may differ depending on which 

browser software (or version) is used. 

 

•  Depending on the PC environment and the browser version, the WEB screens may 

behave differently or suffer some operational restrictions. 

•  When moving from ROOM1 or ROOM2 to another screen, click the tab located at the 

upper right corner of the screen. Click the Reload tab to redisplay. Do not use the 
[Back] button on your browser. If the [Back] button is used, the display may not be 
updated. In that case, select [View] - [Refresh] on your browser.