Nikon DS-2MBWC Manuale Utente

Pagina di 180
 
VI Basic Operations 
 
USB 
 
 
5    Using the DS-L1 when Connected to a PC by a USB Cable 
- 117 - 
USB host drivers 
Use the USB host drivers made by Microsoft Corporation, as the drivers included with your 
interface board may not operate properly. 
 
•  When using the USB 1.1 interface board: 
The driver is included with the OS 
•  When using the USB 2.0 interface board: 
The driver is included with the OS providing it is Windows XP Service Pack 1 (SP1) 
or newer. 
If you are using Windows 2000 or Windows XP prior to SP1, download the USB 2.0 
driver from the Microsoft Windows Update Web site. Visit the Microsoft website for 
details on how to download drivers. 
To install the USB 2.0 host driver that you have downloaded, read the manual 
supplied with your interface board or consult the manufacturer. 
 
 
 
5.2 
Connecting the DS-L1 and a PC 
 
 
Follow the procedure described below to connect the DS-L1 and a PC. 
 
1) 
Turn on the power to the PC main unit and start Windows 2000 or Windows XP. 
2) 
Plug the A connector of the USB cable into the USB port of the PC main unit or the hub. 
3) 
Plug the B connector of the USB cable into the USB device connector of the DS-L1. 
If this is the first time you are using the DS-L1 in Windows, the PC automatically recognizes the 
DS-L1 and installs the device driver. Refer to the subsequent pages for details. 
 
NOTE:  This function is not available if a PictBridge printer is selected in the 
Additional Settings screen of the SETUP menu. 
Before connecting the DS-L1 to the PC, confirm that the Mitsubishi CP900D 
printer is selected on the Additional Settings screen.