Nikon DS-2MBWC Manuale Utente

.

MICROSCOPE

.

   

VI Basic Operations 

 

6  Using the Microscope Control 

- 146 - 

 

 

 

 
 
Compatible only with the Nikon 90i microscope. 

 

1）  In the condenser column 

, select a condenser number to which your desired condenser 

is registered. The condenser will change to the one you select. 

2）  After switching condensers, confirm that the selected number icon is marked with a red 

border and that the condenser number and name are displayed. 

 

NOTE: 
* 

Before using this function, you must set up the condenser information from 
a PC with the setup software. For more information, refer to the instruction 
manual for your microscope. 

* 

Right-click on an icon representing a condenser number, and the names of 
all registered condensers will be displayed. You also can select the desired 
condenser from within this display to change condensers. 

 

 

 

 

 

 

 

 

Compatible only with the Nikon 90i microscope. 

 

1）  In the diascopic illumination aperture diaphragm column 

, select the 

  icon to open 

the diaphragm in increments of 0.1. Or select the 

  icon to close the diaphragm in 

decrements of 0.1. 

2）  Briefly depress the mouse button to adjust the diaphragm in three-increment steps. 

 

NOTE:  The level indicator shows the current aperture of the diaphragm in 

increments of 1.4 in the range 2.0 to 30.5. 

 

 

 

 

 

 

 

 

Compatible only with the Nikon 90i microscope. 

 

1）  In the diascopic illumination field diaphragm column 

, select the 

  icon to open the 

diaphragm in increments of 0.1. Or select the 

  icon to close the diaphragm in 

decrements of 0.1. 

2）  Briefly depress the mouse button to adjust the diaphragm in three-increment steps.