Samsung ct2z58 Manuale Utente

Your TV can memorize and store all of the available channels

for both “off-air” (antenna) and cable channels. After the 

available channels are memorized, use the

CH   and CH  

buttons to scan through the channels.

This eliminates the need to change channels by entering the

channel digits. There are three steps for memorizing channels:

“Air/Cable”, “Auto Program” and “Add/Delete”.



Before your TV can begin

memorizing the available

channels, you must specify

the type of signal source

that is connected to the TV

(i.e., an antenna or a cable 

system).

Select “Air” or “Cable” by pressing the ◄ or ► button.



All available channels are

automatically stored in

memory when channels are

selected by the direct tuning

function.

Press the

ENTER button

at any time to interrupt the

memorization process.



You can add or delete

a channel to display the

channels you want only. To

use the “Add/Delete” function, 

first run Auto Program.

Select “Deleted” or “Added” 

by pressing the

ENTER

button.

The Fine Tuning function lets

you manually adjust the TV’s

tuner if you have difficulty tuning

channels.

Adjust the fine tuning by pressing

the ◄ or ► button.

To store the fine tuning setting

in the TV’s memory, press the

ENTER button.
To reset the fine tuning to “0”, select ”Reset” by pressing the 

▲ or ▼ button, then press the 

ENTER button.



Setting the clock is

necessary in order to use the

various timer features of the

TV. Also, you can check the

time while watching the TV.

(Just press the 

INFO button.)



You can set the On/Off timers so that the TV will switch on 

or off automatically at the time you select.

➢

 You must set the clock first.

☛

When you set the timer “On”, the TV will eventually turn 

off, if no controls are operated for 3 hours after the TV was

turned on by timer. This function is only available in timer

“On” mode and prevents overheating or leakages, which 

may occur if a TV is on for too long.

You can select a time period of

between 30 and 180 minutes

after which the TV automatically

switches to standby mode.

Press the

SLEEP button on the

remote control repeatedly until the

appropriate time interval appears

(any of the preset values from “30 

Min.” to “180 Min.”).

Your TV decodes and displays

the closed captions that are

broadcast with certain TV shows.

These captions are usually

subtitles for the hearing impaired

or foreign-language translations.

All VCRs record the closed

caption signal from TV programs,

so home-recorded video tapes

also provide closed captions. Most pre-recorded commercial

video tapes provide closed captions as well. Check for the

closed caption symbol in your TV schedule and on the tape’s

packaging:

CC

.



You can activate or deactivate the “Caption” function.

AA68-04004A-01Eng_0724.indd   4

2008-07-24   오전 11:39:06