Samsung ak68-00435b Manuale Utente

• Turn on your TV and press the TV/VIDEO button

to select the video mode.

• Turn on your Audio System and select AUX, CD or

DVD.

After plugging in the player, the first time you press
the DVD POWER button, this screen comes up :
If you want to select the language, press a 
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)

1. Press the OPEN/CLOSE button. 

The STANDBY indicator light goes out and the tray
opens.

2. Place a disc gently into the tray with the disc’s

label facing up.

3. Press the PLAY/PAUSE (       ) button or

OPEN/CLOSE button to close the disc tray.

4. Stopping Play

Press the STOP (      ) button during play.

5. Removing Disc

Press the OPEN/CLOSE button.

6. Pausing Play

Press the PLAY/PAUSE (       ) or STEP button on the
remote during play.
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE (       ) button once

again.  

7. Step Motion Play (Except CD)

Press the STEP button on the remote during play. 
- Each time the button is pressed, a new frame will

appear.

- No sound is heard during STEP mode.
- Press the PLAY/PAUSE (      ) to resume normal play.

(You can only perform step motion play in the forward
direction.)

8. Slow Motion Play (Except CD)

Press and hold the        button on the remote during
PAUSE or STEP mode. Press again and you can select
slow motion play for 1/8, 1/4 and 1/2 of normal speed.

- No sound is heard during slow mode.
- Press the PLAY/PAUSE (      ) to resume normal play.
- Reverse slow motion play will not work.

When you stop disc play, the player remembers
where you stopped, so when you press the 
PLAY (      ) again, it will pick up where you left off.
(unless the disc is removed or the player is
unplugged, or if you press the STOP (      ) button
twice.)

• If the player is left for 5 minutes in pause mode, it

will stop.

• If the player is left in the stop mode for more than

30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)

• If the player is left in the stop mode for more than

one minute without any user interaction, a screen
saver will be activated. Press the PLAY (      ) 
button to resume normal play.

• This       icon indicates an invalid button press.

TV (Normal, Widescreen, Projection, etc..)

DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)

DVD Player + TV with S-Video Input Jack 
(The Video Output in Setup Menu must be set to the S-Video.)

DVD Player + TV with interlace Scan Component Video Jacks 
(The Video Output in Setup Menu must be set to the Component(I-SCAN).)

Method 4
DVD Player + TV with Progressive Scan Component Video Jacks. 
(The Video Output in Setup Menu must be set to the Component(P-SCAN).)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on

your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,
change the TV’s external input to 525p(480p or Component) and select “Yes” (See Page 28).

• If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. 

If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan 
settings in the TV’s menu system.

• Depending on your TV, the Method of connection may differ from the illustration above.

AV 

Cable

S-Video

Cable

Video

Cables