Samsung WEP 210 Manuale Utente

Pagina di 2
Guide No.: GH68-12949A
11/2006. Rev. 1.0
Quick Start Guide
Samsung 
Bluetooth
®
 Headset 
WEP210
Thank you for purchasing the Samsung Bluetooth 
Mono Headset WEP210. We hope you will be 
delighted with its operation.
Take a moment before you get started to 
familiarize yourself with your new headset.
Make sure you have the following items with your 
headset: 
Make sure you have the following items with your 
headset: 
Travel Adapter, User’s Guide, Earpiece Cover
Travel Adapter, User’s Guide, Earpiece Cover
Check the accessories
Check the accessories
Charge your headset
Charge your headset
Charge the headset's battery fully before using 
the headset for the first time.
 Plug the travel adapter into the jack on the 
headset.
2  
Plug the travel adapter into the electrical 
    outlet.
 
• Charge the headset until the red light on the  
   headset turns to blue.
• The headset will be fully charged in 
   approximately 2 hours and 30 minutes.
Before you can use your headset, you must pair it 
with your phone.
Put your headset in 
pairing mode
Turn on Bluetooth on your 
phone and pair with headset
Your phone and headset are now paired and 
ready to make and receive calls. To confirm 
they are operating properly, make a call:
1
 
 Place the headset over your ear. 
    See Wear the headset on the reverse 
    side of this guide.
2
 
 On your phone, make a call to the number 
    you want.
3
 
 If your phone and headset are successfully 
    paired, you will hear ringing on the headset.
After you have successfully paired your phone 
and headset, you do not need to repeat these 
initial setup steps each time you use the 
headset.
Test and use
Using your WEP210
See Features and Functions Guide 
on the reverse side of this guide 
for information on using your 
WEP210.
 Ensure that the headset is off (see Turn
    headset on/off on the reverse side of this guide).
 Press and hold the Multi-Function button until the blue 
    indicator light stays on after blinking.
Before using your headset
Volume Up
button
Adapter jack Microphone
Indicator light
Volume Down
button
Earpiece
3
  Remove the travel adapter from the headset.
• The headset cannot be used while charging.
• Use only a Samsung-approved charger or adapter.
Start here
Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use
Get connected in 4 quick steps
Headquarters:
1301 East Lookout Drive Suite 150 
Richardson, TX 75082  
Internet Address: 
http://www.samsungmobileusa.com/
accessories
Customer Care Center: 
1-888-987-4357
Multi-Function
button
The items supplied with your headset may vary, depending 
on your country or service provider.
 Set your Bluetooth phone to discover the  
    headset by following your phone's guide. 
    Typically, the steps involve going to the Settings,
    Connection, or Bluetooth menu on your 
    phone and then selecting the option to discover
    Bluetooth devices.
    Your phone will find the Samsung WEP210     
    headset and ask if you want to pair with it. 
    Confirm this by pressing the Yes or OK key. 
 Enter a passkey or PIN, 0000 (4 zeros), then 
    press the Yes or OK key.
 
• Bluetooth version: 2.0 (compatible with devices of
  Bluetooth version 1.1 or higher)
• Supported Bluetooth Profiles:
  - Headset Profile
  - Hands-Free Profile