Sony HT-DDW880 Manuale Utente

C:\Documents and
Settings\pc13\Desktop\JC060000_2662263323DDW880_GB\2662263323\GB07REM_HT-
DDW880-CEL.fm

masterpage: Left

HT-DDW880

2-662-263-32 (3)

There is no sound from the sub woofer.

• Check that the sub woofer is connected

correctly and securely.

• Make sure you have turned on your sub

woofer.

The surround effect cannot be
obtained.

• Make sure the sound field function is on

(press MOVIE, or MUSIC).

• Sound fields do not function for signals

with a sampling frequency of more than 48
kHz.

Dolby Digital or DTS multi channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

The FM reception is poor.

• Use a 75-ohm coaxial cable (not supplied)

to connect the receiver to an outdoor FM
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.

Radio stations cannot be tuned in.

• Check that the antennas are connected

securely. Adjust the antennas and connect
an external antenna, if necessary.

• The signal strength of the stations is too

weak (when tuning in with automatic
tuning). Use direct tuning.

• Make sure you set the tuning interval

correctly (when tuning in AM stations
with direct tuning).

• No stations have been preset or the preset

stations have been cleared (when tuning by
scanning preset stations). Preset the
stations (page 57).

• Press DISPLAY repeatedly on the receiver

so that the frequency appears on the
display.

RDS does not work.*

• Make sure that you are tuned to an FM

RDS station.

• Select a stronger FM station.

The RDS information that you want
does not appear.*

• Contact the radio station and find out

whether they actually provide the service
in question. If so, the service may be
temporarily out of order.

There is no picture or an unclear
picture appears on the TV screen or
monitor.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

• Assign the component video input

correctly.

ANTENNA

Receiver

To ground

Ground wire
(not supplied)

Outdoor FM antenna

GB01COV_HT-DDW880-CEL.book Page 74 Friday, July 21, 2006 11:37 AM