Sony CDX-GT730UI Manuale Utente
6
E:\JOB\eV\Master(CDX)\DTP\848319S_CDX-
GT730UI(U)\1008_Saishin\4125268111\4125268111CDXGT730UIU\01US02CD-
U.fm
GT730UI(U)\1008_Saishin\4125268111\4125268111CDXGT730UIU\01US02CD-
U.fm
masterpage:Left
CDX-GT730UI
4-125-268-11 (1)
Getting Started
Playable discs on this unit
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Pressing the RESET button will erase the clock setting
and some stored contents.
Canceling the DEMO mode
You can cancel the demonstration display which
appears during turning off.
appears during turning off.
1
Press and hold the select button.
The setup display appears.
The setup display appears.
2
Rotate the control dial until “Demo”
appears, then press the select button.
appears, then press the select button.
3
Rotate the control dial to select “off.”
then press the select button.
The setting is complete.
then press the select button.
The setting is complete.
4
Press
(BACK).
The display returns to normal play/reception
mode.
mode.
Preparing the card remote
commander
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 23.
For how to replace the battery, see page 23.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
The setup display appears.
2
Rotate the control dial until “Clock
Adjust” appears.
Adjust” appears.
3
Press the select button.
4
Rotate the control dial to set the hour,
then press the select button.
then press the select button.
5
Rotate the control dial to set the
minute, then press the select button.
To move the digital indication, press the
select button/
minute, then press the select button.
To move the digital indication, press the
select button/
(back) +/–.
The setup is complete and the clock starts.
Type of discs
Label on the disc
CD-DA
MP3
WMA
AAC