Sony cyber-shot dscu20ex5 Manuale Utente
82
Shooting images
The battery life is short.
• You are shooting/viewing images in an
extremely cold location.
• The batteries are not charged enough.
• The batteries are dead (page 97).
• The batteries are dead (page 97).
—
p Charge the batteries (page 12).
p Replace the batteries with a new one.
You cannot turn on the
camera.
camera.
• The batteries are not installed correctly.
p Install the batteries correctly (page 15).
The power turns off suddenly.
• If you do not operate the camera for about
three minutes when using batteries, the
camera turns off automatically to prevent
wearing down the battery (page 19).
camera turns off automatically to prevent
wearing down the battery (page 19).
• The batteries are discharged.
p Turn on the camera again (page 19).
p Replace them with charged batteries (page 15).
Symptom
Cause
Solution
Symptom
Cause
Solution
The subject does not appear
on the LCD screen.
on the LCD screen.
• The mode switch is set to PLAY.
p Set the mode switch to STILL or MOVIE
(pages 26 and 49).
The image is out of focus.
• The subject is too close.
• The vivid nature mode is selected for the
Scene Selection function.
• The Focus preset function is selected.
p Make sure to position the lens farther away
from the subject than the shortest shooting
distance (10 cm) when shooting (page 37).
distance (10 cm) when shooting (page 37).
p Set it to other modes (page 35).
p Set it to [AUTO] (page 38).
The image is too dark.
• The LCD screen is too dark.
p Set [LCD LIGHT] to [ON] (page 28).
The image is too bright.
• The LCD screen is too bright.
p Set [LCD LIGHT] to [OFF] (page 28).
The image is monochrome
(black and white).
(black and white).
• [P. EFFECT] is set to [B&W] mode.
p Cancel [B&W] mode (page 41).
Vertical streaks appear when
you are shooting a very bright
subject.
you are shooting a very bright
subject.
• The smear phenomenon is occurring.
p This is not a malfunction.