Sony cyber-shot u dsc-u50 Manuale Utente

Pagina di 92
72
“Memory Stick Duo”
The image is displayed 
upside down.
• The image recorded in mirror mode may be 
displayed inverted by 180 degrees, depending on 
the software you use.
p To modify the inverted image, use the rotate tool of the software 
you use.
The image is interrupted by 
noise when you view a 
movie on a computer.
• You are playing back the movie directly from 
the “Memory Stick Duo.”
p Copy the movie to the hard disk of your computer and then play 
back the movie from the hard disk (pages 58, 59 and 65).
You cannot print an image.

p Check the printer settings. 
p Click on HELP for the “ImageMixer Ver.1.5 for Sony” 
application software.
An error message appears 
when you set the supplied 
CD-ROM in your computer.
• The computer display is not set correctly.
p Set the computer display as follows:
Windows:
800 × 600 dots or more
High Color (16-bit color, 65,000 colors) or more
Macintosh: 800 × 600 dots or more
32,000-color or more
Symptom
Cause
Solution
Symptom
Cause
Solution
You cannot insert a 
“Memory Stick Duo.”
• You are inserting the “Memory Stick Duo” 
backwards. 
• The “Memory Stick Duo” has been inserted into 
a Memory Stick Duo adaptor.
p Insert it from the right side (page 17). 
p Insert it directly into the camera.
You cannot record on a 
“Memory Stick Duo.”
• You are using a “Memory Stick Duo” with a 
write-protect switch, and the switch is set to 
LOCK.
• The “Memory Stick Duo” is full. 
p Set it to the recording position (page 82)
p Delete unnecessary images (page 50)
You cannot format a 
“Memory Stick Duo.”
• You are using a “Memory Stick Duo” with a 
write-protect switch, and the switch is set to 
LOCK.
p Set it to the recording position (page 82).
You have formatted a 
“Memory Stick Duo” by 
mistake.
• When you format a “Memory Stick Duo,” all 
data in the “Memory Stick Duo,” including 
images that were write-protected by another 
device, will be permanently erased and cannot 
be restored.
p When you are using a “Memory Stick Duo” with a write-protect 
switch, we recommend that you set the write-protect switch to 
LOCK to prevent accidental erasure (page 82).