Sony dsr-1600.gb Manuale Utente
24
Playback
C
h
apt
er 2
P
la
y
ba
c
c
k
If the following indicators light when a cassette is loaded
To perform the following operations
Indicator
It means:
Cassette memory indicator The loaded cassette contains a cassette memory.
ClipLink indicator
There is ClipLink log data stored in the cassette
memory on the loaded cassette.
memory on the loaded cassette.
Operation
Do this:
Stop playback.
Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item
.
Adjust the audio playback
level.
level.
Use the audio level control on the monitor.
Play back in shuttle mode
while monitoring the video.
while monitoring the video.
Press the SEARCH button or search dial to light the
SHUTTLE indicator in the display section, then rotate
the search dial.
Playback is carried out at the speed determined by
the angular position of the search dial.
The maximum speed for shuttle playback can be
changed using the SHUTTLE menu item
SHUTTLE indicator in the display section, then rotate
the search dial.
Playback is carried out at the speed determined by
the angular position of the search dial.
The maximum speed for shuttle playback can be
changed using the SHUTTLE menu item
Play back in jog mode while
monitoring the video.
monitoring the video.
Press the SEARCH button or search dial to light the
JOG indicator in the display section, then rotate the
search dial.
Playback is carried out at the speed according to the
speed of the search dial rotation. The playback
speed range is ±1 times normal speed by factory
default.
The search dial has no detents.
JOG indicator in the display section, then rotate the
search dial.
Playback is carried out at the speed according to the
speed of the search dial rotation. The playback
speed range is ±1 times normal speed by factory
default.
The search dial has no detents.
Inhibit the unit from
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
Set the CHARA. DISPLAY menu item
to OFF.
Remove the cassette.
Press the EJECT button.
If a CNT value is shown on the time counter display,
the CNT value is reset.
If a CNT value is shown on the time counter display,
the CNT value is reset.
Disable the automatic
rewind function.
rewind function.
DISABLE.
Change the time period
before the unit switches
from stop mode to standby
off mode.
before the unit switches
from stop mode to standby
off mode.
Change the setting of the STOP TIMER menu item
.