Sony dvp-ns15 Manuale Utente

“AUDIO SETUP” allows you to set the sound 
according to the playback and connection 
conditions.

Select “AUDIO SETUP” in the Setup 
Display. To use the display, see “Using the 
Setup Display” (page 52).
The default settings are underlined.

◆ AUDIO DRC (Dynamic Range Control) 
(DVD VIDEO/DVD-VR mode only)

Makes the sound clear when the volume is 
turned down when playing a DVD that 
conforms to “AUDIO DRC.” 
This function affects the output from the 
following jacks:
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL) jack only 

when “DOLBY DIGITAL” is set to “D-
PCM” (page 57).

◆ DOWNMIX (DVD VIDEO/DVD-VR mode 
only)

Switches the method for mixing down to 2 
channels when you play a DVD which has 
rear sound elements (channels) or is recorded 
in Dolby Digital format. For details on the 
rear signal components, see “Checking the 
audio signal format” (page 35). This function 
affects the output of the following jacks:
– LINE (RGB)-TV jack
– DIGITAL OUT (COAXIAL) jack when 

“DOLBY DIGITAL” is set to “D-PCM” 
(page 57).

◆ DIGITAL OUT

Selects if audio signals are output via the 
DIGITAL OUT (COAXIAL) jack.

STANDARD

Normally select this position.

TV MODE

Makes low sounds clear even if 
you turn the volume down.

WIDE 
RANGE

Gives you the feeling of being 
at a live performance.

AUDIO SETUP

AUDIO DRC:

DIGITAL OUT:

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL:
MPEG:

D-PCM

PCM

DTS:

OFF

48kHz/96kHz PCM:

48kHz/16bit

DOLBY 
SUR-
ROUND

Normally, select this position. 
Multi-channel audio signals are 
output to 2 channels for enjoying 
surround sounds.

NORMAL

Multi-channel audio signals are 
downmixed to 2 channels for use 
with your stereo.

ON

Normally select this position. When 
you select “ON,” see “Setting the 
digital output signal” for further 
settings (page 57).

OFF

The influence of the digital circuit 
upon the analog circuit is minimal.