Sony dvp-ns38 Manuale Utente

Connect this player to your TV monitor, or projector using an audio/video (SCART) cord. This 
connection will use your TV speakers for sound.

Be sure to make the connections firmly to 
avoid hum and noise.

When using this connection, check that the 
TV conforms to S video or RGB signals. 
Refer to the operating instructions supplied 
with the TV to be connected. Also, when you 
set “LINE” to “S VIDEO” or “RGB” under 
“SCREEN SETUP” in the Setup Display 
(page 51), use a SCART cord that conforms 
to each signal.

Depending on the disc, the image may not fit 
your TV screen. To change the aspect ratio, 
see page 51.

• Do not connect a VCR, etc., between your TV and 

the player. If you pass the player signals via the 

VCR, you may not receive a clear image on the 
TV screen.

• When you connect the player to your TV via the 

SCART jacks, the TV’s input source is set to the 
player automatically when you start playback. In 
this case, press t (TV/video) on the remote to 
return the input to the TV.

L

C E N T E R

INPUT

to LINE (RGB)-TV

TV

l

 : Signal flow

SCART cord 
(not supplied)

CD/DVD player

When you play a disc recorded in the NTSC 
colour system, the player outputs the video 
signal or the Setup Display etc. in the NTSC 
colour system and the picture may not 
appear on the PAL colour system 
televisions. In this case, open the tray and 
remove the disc.

VCR

CD/DVD player

TV

Connect 
directly