Sony dvp-ns900v Manuale Utente
96
x
DISTANCE
You can set distance from the listening
position to your speakers. Set the distance to
your front speakers in “FRONT” first. Values
in “CENTER” (centre speaker) and “REAR”
(rear speaker) will automatically change to
the same value. Adjust these values to reflect
the actual distance to your centre and rear
speakers within the area described in the
following table.
The default distance setting for the speakers
in relation to the listening position is shown
below.
position to your speakers. Set the distance to
your front speakers in “FRONT” first. Values
in “CENTER” (centre speaker) and “REAR”
(rear speaker) will automatically change to
the same value. Adjust these values to reflect
the actual distance to your centre and rear
speakers within the area described in the
following table.
The default distance setting for the speakers
in relation to the listening position is shown
below.
Be sure to change the value in the Setup
Display when you move the speakers. The
default adjustments are in parentheses.
Display when you move the speakers. The
default adjustments are in parentheses.
Notes
•
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
an equal distance from your listening position, set
the distance according to the closest speaker.
•
Do not place the rear speakers farther away from
your listening position than the front speakers.
your listening position than the front speakers.
•
These settings do not affect the SACD Multi audio
signals.
signals.
x
BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
x
LEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
follows. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the
speakers at one time
Use the amplifier’s (receiver’s) volume control.
FRONT
(3m)
(3m)
Front speaker distance from the
listening position can be set in
0.2 metre increments from 1 to
15 metres.
listening position can be set in
0.2 metre increments from 1 to
15 metres.
CENTER
(3m)
(3m)
Centre speaker distance can be
moved up to 0.6 metre backward
from the front speakers or 1.6
metres forward closer to the
listening position, in 0.2 metre
increments.
moved up to 0.6 metre backward
from the front speakers or 1.6
metres forward closer to the
listening position, in 0.2 metre
increments.
REAR (3m)
Rear speaker distance can be
moved up to 5 metres closer to
your listening position from the
front speaker position, in 0.2
metre increments.
moved up to 5 metres closer to
your listening position from the
front speaker position, in 0.2
metre increments.
3m
3m
3m
3m
3m
FRONT
(0dB)
(0dB)
Adjust the balance between the
front left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
front left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
REAR (0dB)
Adjust the balance between the
rear left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
rear left and right speakers (–
6dB [L] to +6dB [R], 0.5dB
increments).
FRONT (0dB)
Adjust the level of the front
speakers (–6dB to 0dB, 0.5 dB
increments).
speakers (–6dB to 0dB, 0.5 dB
increments).
CENTER
(0dB)
(0dB)
Adjust the level of the centre
speaker (–12dB to 0dB, 0.5dB
increments).
speaker (–12dB to 0dB, 0.5dB
increments).
REAR (0dB)
Adjust the level of the rear
speakers (–12dB to 0dB,
0.5dB increments).
speakers (–12dB to 0dB,
0.5dB increments).
SUBWOOFER
(0dB)
(0dB)
Adjust the level of the
subwoofer (–10dB to +10dB,
0.5dB increments).
subwoofer (–10dB to +10dB,
0.5dB increments).