Sony htp-36ss Manuale Utente
12
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2681273121HTP36SS_GB\2681273121\GB03CON_HTP-
36SS-CEL.fm
Settings\pc13\Desktop\JC060000_2681273121HTP36SS_GB\2681273121\GB03CON_HTP-
36SS-CEL.fm
masterpage: Left
model name1[HTP-36SS]
2-681-273-12 (1)
You can install your front and surround
speakers on the wall.
speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker. See
the illustrations below.
that are suitable for the hole on
the back of each speaker. See
the illustrations below.
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
The screws should protrude 5
to 7 mm.
3
Hang the speakers on the
screws.
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
strength or improper screw installation, natural
calamity, etc.
Installing the speakers on the
wall
wall
more than 4 mm
more than 25 mm
Hole on the back of the speaker
4.6 mm
10 mm
5 to 7 mm
4.6 mm
10 mm
Hole on the back of the speaker
GB01COV_HTP-36SS-CEL.book Page 12 Friday, March 17, 2006 2:27 PM