Sony HVR-1500 Manuale Utente
79
Menu Contents
Chap
te
r 7
Men
u
s
MUTING IN SRCH [> Muting]: Select whether to suppress
the output from the TC OUT connector in search (jog/
shuttle) mode.
shuttle) mode.
OFF [>> OFF]: Do not suppress.
*ON [>> ON]: Suppress.
*ON [>> ON]: Suppress.
TAPE PROTECTION [Tape protct]: Settings related to tape
and video head protection
and video head protection
Description of settings
FROM STOP [> From
STOP]:Set the time to
switch from stop mode to
tape protection mode.
switch from stop mode to
tape protection mode.
STOP TIMER [>> STP
timer]: Set the time to
switch from stop mode to
tape protection mode.
switch from stop mode to
tape protection mode.
0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]: Select time from
12 settings ranging from 0.5 second to 5 minutes.
Factory default setting: *1 MIN [>>> 1 min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
protection mode in 1 minute, which makes start up slower.
FROM STILL [> From
STILL]:Set the time to
switch from still search
mode to tape protection
mode. Also select the type
of tape protection mode.
switch from still search
mode to tape protection
mode. Also select the type
of tape protection mode.
STILL TIMER [>> STL
timer]: Set the time to
switch from still search
mode to tape protection
mode.
switch from still search
mode to tape protection
mode.
0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]: Select time from
12 settings ranging from 0.5 second to 5 minutes.
Factory default setting: *1 MIN [>>> 1 min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
protection mode in 1 minute, which makes start up slower.
NEXT MODE [>> Next
mode]: Select the type of
tape protection mode to
follow still search mode
when the time set with
the STILL TIMER menu
item elapses.
tape protection mode to
follow still search mode
when the time set with
the STILL TIMER menu
item elapses.
*STEP FWD [>>> Step]: The tape is advanced at 1/30 times
normal speed for about 2 seconds.
STANDBY OFF [>>> STANDBY]: Standby off mode
Notes
• The STEP FWD setting is enabled only when “STILL TIMER”
is set to less than 1 minute.
• When used in HDV format, this setting is fixed, at STANDBY
OFF.
VIDEO CONTROL [Video]: Settings related to video
control
control
Description of settings
STILL MODE [> STILL mod]: Select the image to output in
still image mode.
*AUTO [>> Auto]: Output field 1 or field 2 as the still image,
according to the position the tape is stopped.
FRAME [>> Frame]: Output a full frame as the still image.
FIELD1 [>> Field 1]: Output only field 1 as the still image.
FIELD2 [>> Field 2]: Output only field 2 as the still image.
FIELD1 [>> Field 1]: Output only field 1 as the still image.
FIELD2 [>> Field 2]: Output only field 2 as the still image.
Note
When used in HDV format, this setting is fixed, at FIELD 1.
INT VIDEO SG [> Video SG]: Select the test signal to be
output from the internal test signal generator. When SG is
selected using the VIDEO button in the video/audio input
selection section, the internal test signal generator
outputs the selected test signal. This signal can be
recorded.
selected using the VIDEO button in the video/audio input
selection section, the internal test signal generator
outputs the selected test signal. This signal can be
recorded.
*75% COLOR BARS [>> 75% bar]: 75% color bar signal
100% COLOR BARS [>> 100% bar]: 100% color bar signal
BLACK BURST [>> BB]: Black burst signal
100% COLOR BARS [>> 100% bar]: 100% color bar signal
BLACK BURST [>> BB]: Black burst signal
Note
100% COLOR BARS is displayed only when the system
frequency is set to 50i.
frequency is set to 50i.
STD/NON-STD [> STD/N-STD]: Select the STD or NON-STD
mode in accordance with the composite video or S-video
input.
input.
*FORCED STD [>> STD]: The STD mode is always used
(forced STD mode).
FORCED NON-STD [>> NON-STD]: Use this setting when the
input video signal is unstable (forced NON-STD mode).
OUT REF SEL [> Out Ref]: Select the reference video signal
to use.
*REF VIDEO [>> REF]: Use the signal input to a REF. VIDEO
IN (SD/HD) connector as the reference video signal. The
input video signal to be edited is required to be in
synchronization with the reference video signal.
input video signal to be edited is required to be in
synchronization with the reference video signal.
INPUT VIDEO [>> INPUT]: Use the input video signal selected
with the VIDEO button in the video/audio input selection
section.
section.
TIME CODE [Time code]: Settings related to the timecode
generator
generator
Description of settings