Sony PCG-FXA59 Manuale Utente
4-1
Confidential
PCG-FXA53/
FXA59
(AM)
CHAPTER 4.
OTHERS
4-1. Replacing the CPU
1. Removing the CPU
(END)
5 Remove the special tool.
6 The CPU can be removed upward.
1
1 Install the special tool in the CPU.
2 Insert a flat head (-) screwdriver tip into the
2 Insert a flat head (-) screwdriver tip into the
groove as shown.
3 While holding the special tool, slant the
screwdriver in the direction of the arrow.
4 The base under the CPU moves slightly in
the direction of the arrow and the CPU lock
is released.
is released.
NOTE :
• Do not use screwdrivers having a large tip than the width of the groove.
Otherwise, it may cause the groove to be damaged.
• When installing the special tool in the CPU, align the convex of the base.
6
3
5
1
1 Insert all pins of the replacement CPU into the
holes of the base and push the CPU in the
direction of the arrow.
2 Install the special tool in the CPU.
NOTE :
Attach the CPU while
aligning the cut-out with
this position.
aligning the cut-out with
this position.
3
3 Insert a flat head (-) screwdriver tip into the
groove as shown.
While holding the special tool, slant the
screwdriver it in the direction of the arrow.
While holding the special tool, slant the
screwdriver it in the direction of the arrow.
4 The base under the CPU moves slightly in
the direction of the arrow and the CPU is locked.
5 Remove the special tool.
5
2
2
4
4
2. Installing the CPU
J-2507-309-1
JIG FOR COU
Fig.
Part No.
Description