Sony pcv-rx780g Manuale Di Riferimento
VAIO Digital Studio System Reference Manual
34
Installing a Memory Module
1
Choose the size of the memory module and configuration as shown
in the following table. Memory modules can vary in size between
sockets. The minimum memory size is 128 MB. The maximum
memory size is 1.5 GB. The BIOS automatically detects the type, size
and speed of the memory modules.
in the following table. Memory modules can vary in size between
sockets. The minimum memory size is 128 MB. The maximum
memory size is 1.5 GB. The BIOS automatically detects the type, size
and speed of the memory modules.
2
If necessary, remove the memory module you wish to replace (see
3
Remove the new memory module(s) from its anti-static package.
Hold the memory module only by its edges to prevent static-
electricity damage.
Hold the memory module only by its edges to prevent static-
electricity damage.
4
5
Remove the power supply (see
6
Remove the screw that secures the AGP add-in card to the chassis.
7
Press down on the handle at the edge of the AGP slot.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
down the computer, and unplug the power cord.
Memory module configurations (MB)
*
* Your computer ships with at least 256 MB. DDR-SDRAM is expandable to 1.5 GB. Your model
may ship with more than 256 MB DDR-SDRAM depending on the configuration you purchased.
DIMM1
DIMM2
DIMM3
128, 256, 512
128, 256, 512
128, 256, 512
✍
Use only PC2100 memory. Your system does not support EDO, buffered DDR-
SDRAM, or PC100/133 SDRAM memory.
SDRAM, or PC100/133 SDRAM memory.
!
Touch any exposed metal part of the chassis to discharge static
electricity in your body before handling a memory module.