Sony pcv-rx740 Manuale Di Riferimento

Pagina di 92
Upgrading and Maintaining Components
35
Installing Memory Modules
Supports SDRAM memory. Does not support EDO memory or buffered 
DDR-DIMM memory. Memory can be installed in either socket. Memory 
size can vary between sockets. DDR-DIMMs can be single- or double-
sided.
1
Choose the size of the memory module and configuration as shown 
in the following table. Memory modules can vary in size and speed 
between sockets. The minimum memory size is 128 MB. The 
maximum memory size is 1 GB. The BIOS automatically detects the 
type, size and speed of the memory modules.  
2
3
4
If necessary, remove the memory module you wish to replace (see 
5
If necessary, remove any previously installed PCI cards.
6
Remove the new memory module(s) from its anti-static package. 
Hold the memory module only by its edges to prevent static-
electricity damage. 
!
Before opening the system unit, save and close all open files, exit all open 
applications, turn off the power to all attached peripheral devices, shut 
down the computer, and unplug the power cord.
Memory module configurations (MB)
*
* Your computer ships with at least 256 MB. SDRAM is expandable to 1 GB. Your 
model may ship with more than 256 MB SDRAM depending on the configuration 
you purchased.
DIMM1
DIMM2
0, 128, 256, 512
0, 128, 256, 512
Use only PC2100 memory. Your system does not support EDO, buffered DDR-
SDRAM, or PC100/133 SDRAM memory.
!
Touch any exposed metal part of the chassis to discharge static 
electricity in your body before handling a memory module.