Sony PLM-S700 Manuale Utente
29
-US
Getting Started
RESET
Changing the password
When the power is on, press RESET on the
bottom of the power supply box with a
pointed object such as a ballpoint pen.
• If you have already read the WARNING
bottom of the power supply box with a
pointed object such as a ballpoint pen.
• If you have already read the WARNING
messages (page 23 through 27) (e.g.,
while watching a video picture), the
display will return to step 1 in “Setting
the password” (page 28).
while watching a video picture), the
display will return to step 1 in “Setting
the password” (page 28).
• Before you read the WARNING message
(e.g., you have forgotten your password),
the display will return to step 3 in
“Turning on the Glasstron” (page 23).
the display will return to step 3 in
“Turning on the Glasstron” (page 23).
If you need to set a password after having
set the Glasstron to operate without a
password, follow the same procedure
above.
set the Glasstron to operate without a
password, follow the same procedure
above.
Note
Pressing the RESET button does not affect
picture or sound adjustments in PC and video
mode.
picture or sound adjustments in PC and video
mode.
3
Verify a password using the jog dial.
If the password is correct, select YES by
turning the jog dial. If not, select NO.
Then press the jog dial.
turning the jog dial. If not, select NO.
Then press the jog dial.
If you select NO, return to step 1.
If you select YES, go to step 4 in “Using
the Glasstron” (page 31).
If you select YES, go to step 4 in “Using
the Glasstron” (page 31).
PUSH DISPLAY
IS YOUR PASSWORD
CORRECT?
CORRECT?
SEL
123
YES
NO
NO
EXEC