Sony 3-213-480-12(1) Manuale Utente

Pagina di 132
106
Audio DRC (Dynamic Range Control) (DVDs 
only)
Makes the sound clear when the volume is turned 
down when playing a DVD that conforms to 
“Audio DRC.” This affects the output from the 
following jacks:
– LINE 2 OUT (AUDIO L/R), AUDIO OUT L/R 
jacks
– LINE 1-TV jack
– DIGITAL AUDIO OUT (OPTICAL or 
COAXIAL)/HDMI OUT jack only when 
“Dolby Digital” is set to “D-PCM.”
Audio (HDMI) (DVD VIDEOs only)
Selects the output method from the HDMI OUT 
jack.
Scan Audio (DVDs only)
Note
Sound will be interrupted during Scan Audio.
Surround
Turns on the surround function to create virtual 
rear speakers from a stereo TV or two separate 
front speakers (page 19).
Notes
• When the playback signal does not contain a signal for 
the surround speakers, the surround effects will be 
difficult to hear.
• When you select one of the surround modes, turn off 
the surround settings of the connected TV or amplifier 
(receiver).
DV Audio Input
Note
Select “Stereo 2” or “Mix” if you have added a second 
audio channel when recording with your digital video 
camera.
Line Audio Input
When recording from equipment connected to the 
LINE input jacks to a DVD disc in this recorder, 
select line input audio.
For details about bilingual recording, see page 49.
Standard
Normally select this.
TV Mode
Makes low sounds clear 
even if you turn the volume 
down.
Wide 
Range
Gives you the feeling of 
being at a live performance.
Auto
Normally, select this. 
Outputs audio signals 
according to the “Dolby 
Digital” setting (page 104).
PCM
Converts Dolby Digital to 
PCM.
On
Outputs audio signals during 
FF1 fast-forward of a DVD 
disc with Dolby Digital 
soundtracks. For details, see 
page 38
.
Off
Turns off the function.
No sound is output during 
FF1 fast-forward.
Off
No surround effect
Surround1
Creates one set of virtual 
surround speakers
Surround2
Creates two sets of virtual 
surround speakers
Surround3
Creates three sets of virtual 
surround speakers
Stereo 1
Records original sound only. 
Normally select this when 
dubbing a DV format tape.
Stereo 2
Records additional audio 
only.
Mix
Records both original and 
additional sounds.
Stereo
Records stereo sound only.
Bilingual
Records the two different 
soundtracks on DVD-RWs 
(VR mode)/DVD-Rs (VR 
mode). You can select either 
soundtrack when playing 
back the disc.