Sony SCD-XE597
Pla
y
ing D
iscs
9
GB
The operations for normal play and the basic
operations during play are explained below.
operations during play are explained below.
1
Turn on the amplifier. Turn down the
volume level to the lowest.
volume level to the lowest.
2
Select the player position using the
input selector on the amplifier.
input selector on the amplifier.
3
Press POWER on the player to turn on
the player.
the player.
4
Press A on the player to open the disc
tray, and place a disc on the tray.
tray, and place a disc on the tray.
5
Press H.
Playback starts from the first track. If you
want to start playing from a specific track,
turn l AMS L (or press ./>
on the remote repeatedly) to select the track
number before pressing H.
want to start playing from a specific track,
turn l AMS L (or press ./>
on the remote repeatedly) to select the track
number before pressing H.
6
Adjust the volume on the amplifier.
Basic operations during play
Tip
If you turn on the player when a disc is already loaded,
playback starts automatically. If you connect a
commercially available timer, you can set it to start
playing the disc at any time you want.
playback starts automatically. If you connect a
commercially available timer, you can set it to start
playing the disc at any time you want.
Note
During playback, increase the volume level gradually
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
or ears.
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
or ears.
Selecting the playback layer
When playing a hybrid disc with an SA-CD
layer and a CD layer (page 5), you can select the
layer you want to listen to. Also, since both
layers are on one side, it is not necessary to turn
the disc over.
layer and a CD layer (page 5), you can select the
layer you want to listen to. Also, since both
layers are on one side, it is not necessary to turn
the disc over.
Press SA-CD/CD to select the desired
playback layer.
playback layer.
To select the default playback
layer
layer
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until “LAYER
SEL” appears in the display.
on the remote repeatedly) until “LAYER
SEL” appears in the display.
3
Press l AMS L (or ENTER on the
remote).
remote).
The current default layer appears.
4
Turn l AMS L (or press ./>
on the remote) to select the desired
playback layer.
on the remote) to select the desired
playback layer.
5
Press l AMS L (or ENTER on the
remote).
remote).
Selecting the playback area
When playing a disc with the 2 channel playback
area and the multi-channel playback area
(page 5), you can select the playback area you
want to listen to.
area and the multi-channel playback area
(page 5), you can select the playback area you
want to listen to.
Press MULTI/2CH to select the desired
playback area.
playback area.
Playing Discs
Playing a Disc
To
Do the following:
Stop play
Press x.
Pause play
Press X.
Resume play
after pausing
after pausing
Press X or H.
Select a track
Turn l AMS L (or press
./> on the remote
repeatedly).
./> on the remote
repeatedly).
Eject a disc
Press A on the player.
With the label side up
continued