Sony SDP-E800 Manuale Utente
4
EN
Getting Started
Unpacking
Check that you received the following items with the
processor:
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Connecting cords (3)
processor:
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Connecting cords (3)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the processor.
the battery compartment. When using the remote,
point it at the remote sensor g on the processor.
z
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
processor, replace both batteries with new ones.
months. When the remote no longer operates the
processor, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don’t use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
battery leakage and corrosion.
Before you get started
• Do not connect the power cord to an AC outlet or
press the POWER switch before completing all
connections.
connections.
• The cable connectors should be fully inserted into the
jacks. Loose connection may cause hum and noise.
Source Component Hookups
The surround processor allows you to connect up to 3
digital audio (video) source components, such as a
DVD player, LD player (with AC-3 RF output) and CD
player (etc.). You can also connect 1 analog source
component, such as a VCR.
digital audio (video) source components, such as a
DVD player, LD player (with AC-3 RF output) and CD
player (etc.). You can also connect 1 analog source
component, such as a VCR.
What cords will I need?
• Optical digital connecting cord (not supplied)
• Optical digital connecting cord (not supplied)
• Coaxial digital connecting cord (not supplied)
• Video cable (not supplied)
• Audio/video cable (not supplied)
Make sure to match the color of the plugs and the jacks:
• Yellow jacks and plugs: Video signal
• Red jacks and plugs: Right audio channel
• White jacks and plugs: Left audio channel
• Yellow jacks and plugs: Video signal
• Red jacks and plugs: Right audio channel
• White jacks and plugs: Left audio channel
a DIGITAL 1
b DIGITAL 2
c DIGITAL 3
d ANALOG
White (L)
White (L)
Red (R)
Red (R)
Yellow
Yellow
Yellow
Yellow
]
}
]
}