Sony SLV-SE700G Manuale Utente
76
Basic editing
Basic editing
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
• On this VCR, set EDIT to ON in the
• On this VCR, set EDIT to ON in the
OPTIONS-1 menu. If the other VCR has a
similar function, turn it on as well.
similar function, turn it on as well.
To stop editing
Press the x STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted
scene begins. When it ends, press X (pause) again to resume recording.
Note
• If you start editing following the procedure above, the VCR won’t start recording with the
OPC function. To record a tape with the OPC function, press z REC again during recording
pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator
stops flashing to start recording. If you press X (pause) before the OPC indicator stops
flashing, the OPC function is cancelled.
pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator
stops flashing to start recording. If you press X (pause) before the OPC indicator stops
flashing, the OPC function is cancelled.
1
Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR. Search for the
point to start recording and press X (pause).
point to start recording and press X (pause).
3
Press z REC on this VCR to set it to recording pause.
4
To start editing, press the X (pause) buttons on both VCRs at the same time.
X
z
REC