Sony STR-DA7100ES Manuale Utente
99
GB
E
n
jo
ying
Surr
o
und S
ound
x VIR.SPEAKERS (Virtual
speakers)
This parameter is provided especially for
Cinema Studio EX modes (page 92).
• ON
Virtual speakers are created.
• OFF
Virtual speakers are not created.
Cinema Studio EX modes (page 92).
• ON
Virtual speakers are created.
• OFF
Virtual speakers are not created.
x A.F.D. 2CH SW (Creating, low
frequency signals)
This parameter is only available when A.F.D.
mode is set to “AUTO.”
• CREATE
Lets you create low frequency signals for
output to the sub woofer when “A.F.D. AUTO”
is selected.
• OFF
Low frequency signals are not created.
mode is set to “AUTO.”
• CREATE
Lets you create low frequency signals for
output to the sub woofer when “A.F.D. AUTO”
is selected.
• OFF
Low frequency signals are not created.
These settings are applied to all sound fields.
1
Start playing a source encoded
with multi channel surround
effects (DVD, etc.).
with multi channel surround
effects (DVD, etc.).
2
Press MAIN MENU repeatedly
to select “LEVEL,” then press
the control key.
to select “LEVEL,” then press
the control key.
You can also use MAIN MENU on the
receiver to select “LEVEL.”
receiver to select “LEVEL.”
3
Move the control key
V/v to
select the parameter you want.
You can also use MENU on the receiver.
For details, see “LEVEL menu
parameters.”
For details, see “LEVEL menu
parameters.”
4
While monitoring the sound,
adjust the selected parameter
by moving control key
adjust the selected parameter
by moving control key
B/b.
You can also use +/– to adjust the selected
parameter.
parameter.
5
Repeat steps 3 and 4 to adjust
the other parameters.
the other parameters.
LEVEL menu parameters
x TEST TONE (Test Tone)
Initial setting: OFF
Lets you output the test tone sequentially from
each speaker. When set to “AUTO,” the test
tone is output from each speaker
automatically. When set to “FIX,” you can
select which speaker will output the test tone.
Lets you output the test tone sequentially from
each speaker. When set to “AUTO,” the test
tone is output from each speaker
automatically. When set to “FIX,” you can
select which speaker will output the test tone.
x FRONT L_ _R (Front speaker
balance)
Initial setting: center (0)
Lets you adjust the balance between front left
and right speakers. You can adjust the balance
from –8 dB to +8 dB in 0.5 dB steps.
Lets you adjust the balance between front left
and right speakers. You can adjust the balance
from –8 dB to +8 dB in 0.5 dB steps.
x CENTER
xxx
.
x
dB (Center
speaker level)
Initial setting: 0 dB
You can adjust the level from –20 dB to +10
dB in 0.5 dB steps.
You can adjust the level from –20 dB to +10
dB in 0.5 dB steps.
Adjusting the level and balance
of each speaker
of each speaker
2,3,
4
4
2
continued