Sony trinitron aa-2u Manuale Utente
— 15 —
KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17
4-2. MEMORY WRITE CONFIRMATION
METHOD
METHOD
1. After adjustment, pull out the plug from the AC outlet, then replace
the plug in the AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confi rm they were adjusted.
4-3. REMOTE ADJUSTMENT BUTTONS AND
INDICATORS
INDICATORS
4-1. SETTING THE SERVICE ADJUSTMENT
MODE
MODE
1. Standby mode (Power off).
2. Press
Display
Channel 5
Sound Volume +
Power
SERVICE ADJUSTMENT MODE ON
Disp.
(Item)
(Item)
Item
data
data
SERVICE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
Mode
3. The CRT displays the item being adjusted.
4. Press 1 or 2 on the Remote Commander to select the item.
5. Press 3 or 6 on the Remote Commander to change the data.
6. Press MUTING then ENTER to write into memory.
SERVICE ADJUSTMENT MODE MEMORY
Disp.
(Item)
(Item)
Item
data
data
SERVICE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
Green
Red
MUTING
ENTER
7. Press 8 then ENTER on the Remote Commander to initialize.
Disp.
(Item)
(Item)
Item
data
data
WRITE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
Carry out step 7 when adjusting
IDs 0 to 7 and when replacing and
adjusting IC002.
IDs 0 to 7 and when replacing and
adjusting IC002.
8. DO NOT turn off set until SERVICE appears.
SECTION 4: CIRCUIT ADJUSTMENTS
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander
(RM-Y180, RM-Y181, RM-Y182) to perform the circuit adjustments in this section.
Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator
RM-Y182
MUTING
DISPLAY
POWER
(Enter into
memory
memory
(Service Mode)
(Service Mode)
1
2
3
4
5
6
8
0
VOLUME (+)
ENTER
Disp. (Item up)
(Device Item Up)
Disp. (Item down)
(Initialize)
Item (Data up)
Item (Data down)
(Device item down)
(Enter into
memory
memory
(Remove from
memory)
memory)
(Service Mode)