Sony trinitron kv-29sl40a Manuale Utente

7.  Press 

 then 

 on the Remote Commander to

     initialize.

Carry out step 7 when adjusting
IDs 0 to 4 and when replacing
and adjusting IC003.

8. Turn set off and on to exit.

Use Remote Commander (RM-Y167) to perform circuit
adjustments on this model.

NOTE : Test Equipment Required:

1.  Pattern Generator
2.  Frequency Counter
3.  Digital Multimeter
4.  Audio OSC

  

SERVICE MODE PROCEDURE

   1.  Standby mode. (Power off)

2.

 

   

 

 

 

 on the

Remote Commander. (Press each button within a

second.)

  SERVICE  ADJUSTMENT MODE IN

3. The CRT displays the item being adjusted.

4. Press 

 or   on the Remote Commander to select the

item.

5. Press 

 or   on the Remote Commander to change the

data.

6. Press 

 then 

 to write into memory.

  SERVICE  ADJUSTMENT MODE MEMORY

                     

  

Green

Red

1.   After adjustment, pull out the plug from the AC outlet,
      then replace the plug in the AC outlet again.
2.  Turn the power switch ON and set to service mode.
3.  Call the adjusted items again to confirm they were adjusted.

Disp.
(Item)

Item
data